|
View Full Version : Trunk Lid Bent tl757 Mar 9th, 02, 08:36 AM The thunk lid on my 69 is a little bent on the bottom passenger side. It lifts up about 1/4 to 1/2 of an inch. What is the best way to even it out without denting anything. There is not spoiler on it yet Thanks Tim MARTINSR Mar 9th, 02, 08:54 PM Is the lid "bent" or just twisted? If one of the rear corners is just up, you can open the lid and grab each side with a hand and twist it by pushing on the low side and pulling on the high side. ------------------ Fan of anything that is interesting and moves human beings. 1965 Buick Gran Sport Convertible 1965 Buick Skylark H/T 1948 Chevy PU with 401 Buick MARTINSR Mar 9th, 02, 08:55 PM Of course you will want to be sure that all the rubber bumpers are hitting properly, there may be a problem with one so it is pushing the lid up too high. ------------------ Fan of anything that is interesting and moves human beings. 1965 Buick Gran Sport Convertible 1965 Buick Skylark H/T 1948 Chevy PU with 401 Buick |