Folks, I need some pictures of a 67 console with gauge pod mounted.

I have the aftermarket 3 gauge pod but my console is the non-gauge type. I made a template but I would like some pics to make sure I'm putting it in the right spot before I go further.

BTW, I stripped the paint (sprayed on by a previous owner) by using the 'oven cleaner and placed in a garbage bag overnight' method that was recommended in a previous post. It worked like a champ. It removed all the sprayed on paint and didn't damage the plastic. I used aircraft remover stripper on the metal "frame" and doors.

I plan on painting it using duplicolor 'adhesion promoter' and duplicolor 'bumper coating' paint.

Thanks,
Scott

There's some good pictures in this aucton http://cgi.ebay.com/ebaymotors/67-1967-CAMARO-RS-SS-GM-CONSOLE-WITH-GM-GAUGES-RARE_W0QQitemZ8061585002QQcategoryZ33675QQrdZ1QQcm dZViewItem

WOW, $1300 for a console and gauges.

Yeah, but it's "almost" a new/nos piece. I could see 1k, for it, but 1400 is getting a little steep.