I have a 69 camaro where I just recently rebuilt the suspension. The one thing I would like to change is to lower the rear end around 1.5" without changing anything that I have already done. Bye the way, it is all stock suspension with urethane bushings and subframe connectors. I would like to add in the 1.5" lowering blocks. Who makes them and is the only thing I need to do to lower the rear by an inch and a half? Thanks for the help in advance.

Speedway Motors makes nice looking ones. Google them, they have good stuff. If you have 1.5 inches left of thread on your spring pad bolts than it should work fine.

Randy

Thanks for the info. I'll check it out. From the looks of my U-bolts, I should have plenty of thread left. Thanks again.

summitracing.com 27 bucks for it thats what i did before i got my drop leafs..... the are under the truck section but work great..comes with blocks and ubolts and bolts right up

Thanks for the heads up. I will check them out as well.