Hey guys is there any way to remove the heater motor from a 69 camaro without taking the inner fender out?

No...
u leave the inner fender and remove outter fender

Yes there is a way, but involves some cutting. I did this on mine and it works. You can cut a hole in the inner fender well and access the blower motor. Remove the motor and replace it with a working one. Then cut out a piece of sheet metal (a thin gauge) and cover the hole. Drill some holes and screw the cover in from the bottom with sheet metal screws. That way if you ever need to replace the blower motor again, you could just unscrew the screws and take off the cover. After the cover is screwed in, spray the cover with some undercoating and you'll never know it's there. :thumbsup: