james1
May 29th, 06, 03:29 PM
Why did GM use the Ford Model to design a Camaro!!!!!!!!!
That is GM's lose, the race for future Car design for many years!!!!!!!
GM still could design an old style Camaro with the New LS1 Power!!!!!
Current GM Management will never see that reto cars due not have to follow the prevailing gas wars.
Build the car that the 50's GENERATION WANTS!!!!!!
I could have designed the Camaro that GM thinks is the ****!!!!!~
All I would have had to due is ad the GM grille to The Mustang Body.
I think GM may have infringed on Ford's design.
clwilcox33
May 29th, 06, 08:26 PM
I disagree, though even if I didn't, I wouldn't get quite so excited over it.
In addition, there is an entire section for 5th gen posts that would be a better place to discuss the car.
james1
May 30th, 06, 03:50 AM
Thank You Chris
As the owner of more than 500 Camaro's sum that have run as fast as 6.90's as stock body types and Funny Cars that have run 5.60's I feel for his concern's. But when he states that I should consider a different location for my discussion then he needs to read the others.
JAMES1
ps my first Camaro was a 67 302 engine car with the cowl air intake. Car ran 12.12 on 7 inch M&H tires.
james1
May 30th, 06, 03:58 AM
Chris I forgot to state I also ran a Camaro at Daytona the cars were called super speedway cars. Manard Troyer drove the car at a top speed of 235 on the back side. NASCAR found the car's to be faster than the speedway cars so they banned them. The cars went on to be Trans Am then the Texaco built the I-Rock program. I also headed Crane Cams Sales when Somkey was the big HP maker.
What Do I Know.
james1
JWA
May 30th, 06, 06:06 AM
I have to agree with Christopher, this forum section would have been better for your post:
5th Gen Area (http://www.camaros.net/forums/forumdisplay.php?f=52)
Obviously you know a bunch about Camaros, but you are lacking a little in spelling, grammar, and how this forum is laid out. :clonk: Sorry I couldn't resist since you put that last comment out there :D :D
PS I reported the thread so it might get moved.
DjD
May 30th, 06, 06:49 AM
I think we will just close this one....