Guys, in my infinite wisdom...:rolleyes: I replaced my 21" small block radiator with a 24" radiator. I thought that all small block radiators were the same. Turns out there are different sizes for w/a.c., no a.c. etc. Now my old shroud will not fit the new radiator. The new radiator bolted in fine, but I need a shroud that is wider and almost "offset" to the pasenger side a bit.... Need help figuring out which shroud to get...
Dano:beers:

I ran into the same problem. When I ordered through Classic Industries they told me to order a shroud for a car with AC. Even though my car is a non AC car. I put a 4 row radiator in mine and the shroud fit good. This should solve your problem.

Thanks a bunch! I knew it had to be something simple....I'll call them on Monday and make sure that the dimensions are the same.:thumbsup:
Dano

I replaced my 21" stock radiator with a 23" 4 core unit. I was able to get a shroud from my GM dealer. I told them I wanted it for a small block car with a/c. They matched the best price I could get on the internet(about $75, if I remember correctly) and had it in a day or two.

Thanks Gunner...I sometimes forget that GM still has some parts available for our cars...:thumbsup:
Dano