|
DZ Fool Jun 7th, 06, 08:16 PM Could someone please measure the depth of a small block shroud for me ? I have a sbc long water pump and the stock fan assembly with clutch. The fan sticks out of the shroud completely. Gary L Jun 7th, 06, 08:52 PM 6 1/4" over-all from front edge of plastic to back edge of plastic measured at the top. 5 1/2" measured from the radiator to the back edge of the plastic at the top. click Jun 8th, 06, 08:35 AM This will be pretty close to what you should shoot for. Shroud is 6 1/4" plastic edge to plastic edge on top. Mine runs steady at about 180, a bit more with the a/c on but has yet to puke :) http://www.brainerd.net/~knudsen/69RS/UnderHood/FanShroud%20001a.jpg http://www.brainerd.net/~knudsen/69RS/UnderHood/FanShroud%20005a.jpg | ||