Does anyone out there know for sure or have original tag on there 69 with positraction? Ones sold at Rick's says "use limited slip diff. lubricant only' while Paragons for corvettes state the one for 69 should read "use positraction diff. lubricant only" Someone I know thinks theirs is original and states positraction, any input would be greatly appreciated! Thanks! Larry,69Rfine.

The original tag on my 69 Z/28 says "use positraction diff. lubricant only".

You have to check Ricks "just in" section. The correct tags are there.

Part #: RC-473 Description: 68-69 POSI REAR END PLUG TAG, 3/4" HOLE

Year: 1968 1969
Catalog Section: Rear End & Axle Group: Rear End Rebuild Parts

http://www.rickscamaros.com/online-store/scstore/graphics/rc-473.jpg

Our Price: $ 8.49

Correct red fan shaped tag for rear end filler plug. Hole diameter is correct for original 68-9 rears, requires special fill plug available separately (SS-120).

And the correct filler plug:

Part #: SS-120 Description: 3/4" REAR FILLER PLUG FOR POSI TAG

Year:
Catalog Section: Rear End & Axle Group: Rear End Rebuild Parts

http://www.rickscamaros.com/online-store/scstore/graphics/ss-120.jpg

Our Price: $ 15.00

Hard to find rear end plug that accepts the red posi tag RC-458 (not included). This size mostly found on 68 and up rears 3/4" National Pipe thread.

Thanks everyone! That is what I thought but now you just confirmed it! I apprciate the input! Larry

For the record, 69s did not get the metal tag on the rear cover taht says something about "Limited Slip" I bought one from Year One before I learned it was incorrect.