I getting ready to order a set of Weld Draglites and to make shure I got this right.
Is the lug pattern 4.75 and the stud size 7/16?

Perry

Yes!!

AND I will say this!!

You MAY need longer studs b/c the centers will probably be thicker such that you will have less thread to nut engagement UNLESS they are the older "shank" type nuts with washers!!

NO biggie at all b/c you can go to a GOOD parts store and look through their bin or drawer of studs and find longer ones that will be fine!!

Maybe not needed, but PLEASE check this really close!! You don't want "shank" type nuts to bottom out here is why I mention this b/c it can kill you!!

Fwiw, mine are now 1/2" x 3" long studs b/c of my Pony-car Bullitts!! Total conversion here!!

pdq67

Thanks for the reply. I plan on getting the long ARP studs and the open ended lug nuts. Not shure what length yet.

I am about to sell my 15x10 Drag Lites if you are interested? Just thought I'd ask.. email me if interested: shooterpcb@yahoo.com or 334-655-2223 Neil

The ARP wheel studs you want are 7/16"-20x2-7/8th" long with a 0.479" dia. press in shank, part number 46150.

yeah. i got the 5/8 moser axles and my wheels take a 5/8 stud.