http://i48.photobucket.com/albums/f219/CamaroD/PICT0063.jpg
I know you guys have seen these parts before, but I have no one else to show them to. I ordered from summit yesterday and they are here today. They were very helpful and I couldn't be happier with the price and service. I am confident that I made the right decision considering my goals and budget so far with the exception of the torque converter (TCI Breakaway). It says that it stalls around 2400 and I was told that with my car it should stall higher. I hope it does, and any comments about that are welcome. The car has 411s I believe, and I hope that my 286h cam and performer rpm intake will allow me to rev to almost 6k. I decided to get the hp 4150 holley 750 with manual secondaries. I have vacation next week and might get all of this in the car by the end of the week. Ill keep you posted, and please feel free to comment. Oh, my goal for this street car is to tune it to reach high 11s. I also ordered 1.5 and 1.6 rockers thinking that it would work better with my cam which is 236/236 @.50 Any comments on that welcome also.

Thanks, Darren

Does your car have a 10 or 12 bolt rear? I checked out the pictures from the link in your sig, your car looks pretty good. With a 406 it should run pretty good, don't know if you will hit high 11's.

I see you are from Modesto also. I'm on La Loma near the creek.

It has a weak 10 bolt in it right now. Will be changed in the future. I've looked for your car when driving down La Loma before but haven't seen it yet. Thanks for the reply. Darren

It has a weak 10 bolt in it right now. Will be changed in the future. I've looked for your car when driving down La Loma before but haven't seen it yet. Thanks for the reply. Darren

I forgot, we did have this conversation before. :clonk:

Steve

nice pixs glad to hear no problems with shipping enjoy