Hello Team Camaro .
Need help just purchased roof support brackets from Rick's camaro; all 3 brackets have perforated holes and 2 are bent at 90 degrees. See attached picture. Where do they go? The kit is for 67/68 camaro
Thanks,
Ray

Those brackets hold the headliner in place. They should have little 'barbs' all around the edges. They are attached to the body, and the headliner gets streched and folded over them. The long one looks like the one for the front, and the two 90deg ones are for the back window...although I think there is one more for the top of the back window. Maybe you didn't get that one with your kit.

Yeah, it looks like you may be missing a piece or two. Did you get more than just those 3 items? I think it's like 13 pieces in the full kit for 67-68.

Thanks for the help .I did get 13 pieces with the kit.
The three pieces for the headliner ,they are bolted in ?
The car had no headliner inside .
Ray

Ray you need some snap in T-clips that you can get from any body shop. Like the guys said, the headliner is actually shoved in between those and the roof structure. But mine had adhesive on the barbed side to hold them in place until the plastic pinch molding was installed.

Thanks for all the help.
Ray