HI All, the current owner of my car has the electric fan set up to run at all time with the key on. The fan has no marking so I can not tell what type it is to find a diagram.

The current setup is as follows.
The fan seems to have a relay built into the top.
There is a large battery wire wired to (B)
There is a ground (G) as well as a ignition hot wire.(+)
There is a coil of wire from the relay that goes into the radiator fins I assume that is the temp switch.

There are 2 empty spade terminals on the relay one labeled (C) and one labeled (M). Any Idea how to wire those 2 terminals so the fan doesn't constantly run?

Thanks
Chris

Do you have a pic of the relay? I am not familiar with those markings on a relay ( I use Bosch )

The M is for a manual on option, C is for the air conditioning connection. Here are the instructions for a Flexalite fan:

http://www.flex-a-lite.com/auto/160-99975.pdf

Thanks for the link...THAT is the fan!!!!

saved me alot of time.

Chris