How does the front of the boot attach? I made a custom cloth one years ago.
It is fine standing still but if I got on the highway it would become a parachute rapidly. Any ideas. Brian

The ones I have seen like mine work ok, they have a rigid stiff flap that tucks behind the rear seat back and the top well.

Thanks dennis I will check one out live. Brian

I have the "parachuting" issue as well.

I did a search and found a previous thread where this topic was discussed.

Here is a link to the previous thread:
http://www.camaros.net/forums/showthread.php?t=46043&referrerid=11427 (http://www.camaros.net/forums/showthread.php?t=46043&referrerid=11427)

I am thinking of trying the snap option in the header bow.

Foggie,
That is the best idea i have seen. There is no room to snap the boot behind the rear seat? If not I will do the same. At least it is a cheap fix. Thanks. Brian

Guys, I added three snaps to the leading edge of my boot. There is just enough surface area on the structure immediately behind the rear seat , back , bulkhead, to add the mating part of the snap. The best part is it is goes un-noticed by most.................... JBJ

Have a picture. I sounds good. Brian