Anyone willing to try to run this combo, since it no longer runs and I won't get to see it first hand.

350 +.030 iron block
6.00 connecting rod
12.5:1 static compression piston
.038" compressed head gasket
0 quench
64cc Dart 215 iron heads
2.08 intake valves, 1.60 exhaust
General kinetics hydraulic cam 300 degrees advertised duration, .510" lift (G/K measures their advertised duration at 6 degrees)
1.5 rocker arms
1 3/4" primary headers
Edlebrock 750 performer carb #1411
Torquer intake
24 degrees ignition timing @ 3000 rpm no (vacum advance)

Also same cam with 1.6 rockers (should be .540 lift)
Running 29 inch tire with 3.73 rear gears and an M21 close ratio muncie in a 68 Camaro.

Thanks!

Dave