|
: energy suspension bushings problem dawg Nov 15th, 06, 03:38 PM Im installing a shackle set on my Camaro and it seems that 2 of the four metal inserts are at least 3/16ths underside? I cant push the bolt through? anyone else have this problem before? Guest174 Nov 15th, 06, 07:18 PM first i've heard about it! mine went in perfect fit. HarleyD67 Nov 15th, 06, 07:29 PM Sorry, i had no issues either. zdld17 Nov 15th, 06, 07:54 PM Metal inserts? None of my Energy bushing had inserts in rear. The orginal front bushings did , but you throw that stuff away. Not usable when you get thru removing bushings. Mine was a 69.. Guest174 Nov 16th, 06, 07:25 AM "z" the '68 energy suspension shackle bushings come with a metal sleeve that is inserted thru the bushing, the bushing is positioned and then the bolt is inserted. dawg i would check with whoever sold you the parts to make sure they gave you the right stuff also you can get help at www.energysuspension.com (http://www.energysuspension.com) zdld17 Nov 16th, 06, 11:36 AM "z" the '68 energy suspension shackle bushings come with a metal sleeve that is inserted thru the bushing, the bushing is positioned and then the bolt is inserted. dawg i would check with whoever sold you the parts to make sure they gave you the right stuff also you can get help at www.energysuspension.com (http://www.energysuspension.com) Ok, thats where you got me,, I did not change shackles. I used my stockers and their bushings. I don't recall even seeing a sleeve in the kit. I found it,, I got the bushing only where you got the shakles kit. | ||