i was told after painting to get out the flaws i have to wet sand with 2000 then cut and buff to a shine i am using ppg butternut yellow single stage i was just wondering what are the steps to color sand? what grit and also proper cut and buff pads and polish. if anybody can help me i would be a very happy man thank you and have a good easter

I am not a pro but I do get very good results, heres what I use.
I color sand with 2000 grit wet paper, no circles just straight directions. Then I use a fine cut rubbing compound on a wool pad, then I use Meguires no.83 polishing compound on a foam pad at low speed. After all that use a good glazing compound to remove swirls.
3Ms finesse-it system works very well if you can get it in your area.
Hope I helped a little.
Ron

I found a great website to get info on paint and body....www.autobody101.com

GOOD MOVE ON THE WEB SITE....THANKS