I assume this probably belongs in the ENGINE topic, but it seems like more of the painters hang out here.

Has anyone used the POR-15 Engine Paint before?
I brushed on my first coat last night and this stuff seemed quite runny and transparent.
Can I expect better results with the second coat? How many coats did it require?

Does spraying provide a more even coat? It HAS to be quicker... I brushed that SOB for an hour and 40 min last night. LOL

Here's a couple older threads about using
POR......

http://www.camaros.net/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=3;t=003091

http://www.camaros.net/cgi-bin/forum/ultimatebb.cgi?ubb=get_topic;f=3;t=001047;p=2

I'm lazy and didn't read the threads but the POR15 engine paint needs heat to cure as in running the motor.

Ok, I spoke too soon.
Second coat is on now and it looks much better. Looks like I even have enough paint from that little pint to give it a third coat.

Just a quick factoid from POR, you should use the engine paint on top of the rust paint. What I found and inquired about was the paint peeling off in large pieces. However, it seemed to stick fairly well on the wife's 2.8v6.