Trying to wire up new gauges on 67 RS, removed the original console but cant seem to work out where all the wires go from the plug
1 tan
2 two green wires
3 grey (dash Lights?)
7 2 pink wires
8 blue/white stripe
9 light blue
10 tan
11 dark brown
12 blue

Try this link. It has pics of where the connectors go.
Kev


http://www.camaros.net/forums/showthread.php?t=80376&highlight=67+console+wiring

thanks kev my console seems to be different to that console it has a plug that goes into the back

Kiwi67..
Take a few pics and post them so we can see what you have.

Kev

The "what it is, Where it is" sticky has some pics too, here http://www.camaros.net/techref/electrical/What_it_is/1967_gauges.htm

sorry guys its the first time ive used this site and still trying to get my head around it couldnt work out how to load pictures but now have,
its the speedo, fuel, indicators etc gauges that ive removed, if you follow the copper plate thing on the back then i reckon the wires should go like this
1 tan fuel sender
2 2xgreen temp warning light
3 grey dash lights
7 2 xpink right indicator light
8 blue/white gen light
9 light blue brake light
10 light brown left indicator
11 dark brown oil light
12 blue earth

is this correct? doesnt make sense though 2 pink wires for indicatorhttp://i125.photobucket.com/albums/p58/matdyl/speedowiring.jpg

See if this helps
http://www.camaros.net/forums/showthread.php?p=559407&posted=1#post559407

The thread is from when I replaced the fuel guage in my 68 with a tic toc tach. The last post has the guage connector pinouts. 67 and 68 are close but I'm not sure if they are identical. The wire colors will be the same.

Your chart looks close, but unless 67 is different, the turn idicators should be lt bl and dk bl, and the power for the fuel guage should be pink.