I have a set of six body biscuits and I know where the front two go but I don't know where
the other four go. I,also, need to know to install them and if it is a one man job.
I've asked bunches of Body Shops and they all
want to do the "fast money-high profit" jobs.
Is there a manuel that shows a step by step
procedure?

Hit the search button, there has been a lot of discussion about it in the past.
David

------------------
The older I get, the faster I was!

If your talking about the sub frame bushings, yes, 1 person can do the job, and for the sub frame, the metal sleeve bushings go on top of the sub frame(big ones in the back)and the bottoms are all the same. Use a .610 metal pin in the alignment holes and bolt it all in.

David is right hit the search button on this. I replaced these on my 67 and had major problems with rust. However the good news is it can be overcome. I did a long a detailed explanation on how I did these a while back. Try searching using my name.