anybody ever used there powermesh with
por15 wondering how good it worked for
small holes





[This message has been edited by Tonyx33 (edited 02-15-2003).]

For small holes use there Epoxy Putty. You will find many uses for that product on the car and around the house.

Bob

Im about to start with the swiss cheese pin holes in my trunk pan, Im planning on using a coat of POR15 first to seal rust, then their POR epoxy to fill the holes while the POR15 is still tacky, then smooth over the mesh on top of the putty, then another coat of POR15. Then while tacky a coat of white paint to lighten the pan before the splatter coat to finish.
The dealer I use, said that Mesh is awesome stuff and its VERY fine, use the latex gloves with it all the time.

------------------
.... Click aka Jim .. Cylinder Index = 35
Dover White 69RS 350/255 LM1, TH-350 auto., A/C
Blue Vinyl top, F&R spoilers, 3.08 Eaton Posi.
fold down rear seat, PDB, PS, Cowl Induction, Endura Bumper
My RS.. www.brainerd.net/~knudsen/69RS (http://www.brainerd.net/~knudsen/69RS)

Tony,
I rebuilt most of my trunk with powermesh! I think it is wonderful stuff. Ofcourse, it's always best to cut out rust, weld in new metal etc., but if you don't have the equipment/experience for that, then powermesh is a great alternative.


Dan

Exactly Dan why Im trying the Por Mesh. I dont have welders and cutters or even an air compressor yet so playing with this should be fun.

Dan email me a link to some info. on the August show out there ok? We are trying to work that into a long vacation cruise. One of my daughters goes off to college in August sometime and if I dont have to move her (thats what boyfriends are for) then it shouldnt interfer with a cruise trip for us to Seattle and Denver both.
http://www.camaros.net/forum/smile.gif Hurry up summer

------------------
.... Click aka Jim .. Cylinder Index = 35
Dover White 69RS 350/255 LM1, TH-350 auto., A/C
Blue Vinyl top, F&R spoilers, 3.08 Eaton Posi.
fold down rear seat, PDB, PS, Cowl Induction, Endura Bumper
My RS.. www.brainerd.net/~knudsen/69RS (http://www.brainerd.net/~knudsen/69RS)

Originally posted by Tonyx33:
anybody ever used there powermesh with
por15 wondering how good it worked for
small holes

thanks for all the help!!!


[This message has been edited by Tonyx33 (edited 02-15-2003).]

i would reccomend using a product called "masterseries" moisture cured urethane
it is made by pm industries in new jersey this stuff makes por 15 look like latex house paint .
i do not own stock in the company i just love this product it is simmilar to por 15 just 100 times better try it and you ll see the difference
i use it with the por puty and it makes a great combo. good luck with your project, alan

Hey Alan,
That "masterseries" sounds really good. You wouldn't happen to have a website address and a normal address for PM industries? Thanks Alan!

Patrick

http://www.nomorerust.com/aboutus.html

Thanks Joe!

It was absolutely MY pleasure Patrick!
Google http://www.google.com is a wonderful thing!
;)