im trying to lower the rear of my 68 camaro but it dosnt have U bolts around the axle and a 1" block dosnt fit between my mounts where it mounts to the traction bars...the front end was so worn out it has already lowerd it self 2" haha so now i need to get the back on down, any ideas?

take the springs out, flip the bolts and the bracket from top to bottom then you will be able to place the springs UNDER the axle. that will lower it a couple inches. does this help?

take the springs out, flip the bolts and the bracket from top to bottom then you will be able to place the springs UNDER the axle. that will lower it a couple inches. does this help?
huh? this ain't no pickup truck (I thinnk, poster didn't say what it is...) the springs on a camaro are under the axle.... and the perches are welded on...

take the springs out, flip the bolts and the bracket from top to bottom then you will be able to place the springs UNDER the axle. that will lower it a couple inches. does this help?
Na, the axle is on top of the axle right now.... theres a pic of it on my cardoamin from the back of my car if someone could help me out...i'll try to explain better.... im used to seeing U bolts holding the axle on, to the leaf springs but instead of that it has traction bars that are bolted on to a plate which is welded to the axle, i dunno if thats stock or not ?...but i bought a 1" block and it dosnt fit in the plate that is welded to the axle and the traction bar part, plus im worried the traction bars might hit ?
http://www.cardomain.com/ride/2542119

i am fixn to do the same thing to mine

cant really see the axle, if you can get me a pic I can probably help further....Harley's arent the only thing Ive lowered...lol