Can anyone post pics/dimensions of the engine mounts on the frame for a BBC.

i have a project i'm starting, and i'd like to fabricate my own mounts, and i'd just like to check a few dims to see if i'm right.

i'm referencing off the lower bolt. so the lower bolt hole centerline to the centerline of the engine mount hole is:
passenger side 3.25"
Driver side 2.6"

this is my estimation on CAD, what i'm trying to do is move the engine to the passenger side and keep it level, while using the factory heights on the frame mounts.

thanks!
Brian

Dave Pozzi's site has some pictures and dimensions hopefully they will help
http://www.pozziracing.com/camaro_engine.htm

i know david's site ;)
i'm looking for a specific dimension for the frame mount portion of the assembly, which i didnt see pictured.
Now maybe i'm wrong, and its on there.

Anywho, looking for the dimensions i mentioned if anyone could take a moment.
thanks
Brian

I don't have any BB engine brackets to measure, - unfortunately.
The BB mounts are supposed to move the engine to the pass side 1", but that's just what I've always heard. It does match the BB auto trans crossmember offset that I have measured myself.
David

Alright, based on the cad drawing, i think it moves it closer to only 3/8", if it actually keeps it level.