![]() |
|
Camaro Parts at SS396.com GROUND UP & SS396.com Official Sponsor of Team Camaro |
|
|
||
| Team Camaro Tech Current Topic: Turbo 350 | ||
Registered users (free) do not see these large ads 
| Troubleshooting Diagnosing problems done here. |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
I have a question i have a 84camaro with a 350 turbo tranny thats stuck in first even after manual shifting from under the car what would cause the tranny to lock up like that?
|
| Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
|
Bad govenor, or a stuck shift valve most likely. Good news is, the govenor is easy to get to with the tranny in the car. The valve body isn't too bad either, except you have to drain the fluid and remove the pan to get to it.
__________________
Dave ======================== 68 Coupe, 350 w/ Edelbrock Performer RPM heads, cam, intake, 700R4, Dave's small body HEI |
|
#3
|
||||
|
||||
|
A vacuum modulator with no vacuum causes a late or never upshift. Hose off or line crimped shut? bad modulator?
Jeff |
|
#4
|
|||
|
|||
|
Good point Jeff...perhaps the easiest to check of all.
__________________
Dave ======================== 68 Coupe, 350 w/ Edelbrock Performer RPM heads, cam, intake, 700R4, Dave's small body HEI |
|
#5
|
|||
|
|||
|
I had to slam it in park from reverse, lost brake pressure and that was the only way to get it to stop rolling
![]() Sent from my SCH-R680 using AutoGuide.Com Free App |
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|