[newbe60]

Have a 68 camaro connvert putting an ls-2 in with 17" kmc 5 spoke "hot wheel rims" etc.. have decided on orange and white combo.. need help deciding pinstipe style.. with help from a lateral g member I now have 2 choises,, please help me decide as I'm not sure which way to go.. Choises are the Long Pinstripe down the center of the car or the short pinstipe on the top of the fender.. here's the shots to choose from..please by voting and also help by making comments as I'm lost and can't decide

[400bird]

I don't really like either option as they are pictured, but I think the long pinstripe could look good if it wasn't so thick

[wiskeesour]

It would look good either way but I prefer the short stripe.

[Eric Kammerer]

I'd have to see it taped on the car Scott, but here are my thoughts.

The upper version (stripe down the middle) hints at a type of stripe available on a 68, but with your own touch. I like that. But, I don't like that the lower portion of the front runs toward the back of the car. If it came down straight, or even ran to the front slightly, I think it would look better. Or even if the top side was made to run at the same angle. It's kind of hard to explain, but I think there's too many varying lines/angles going on there.

[57plymouth]

The long stripe seems kinda "Baldwin Motion" which I dig. It gets my vote.

[BelAirBob]

The second ones' stripes are too thick, and the first one destroys the beautiful line of the front clip by dissecting the wheelwell. Just MHO......


I took the liberty to change a few things .....

[JV69z/28rs]

I have to say I like Belair Bob's also. The Baldwin type stripe going throught the wheel opening doesn't seem to flow. The second choise I think would look better if it was carried over about 2/3s the length of the door. You need to decide what you like best though because you have to live with the final results - not us.

[dbackse350]

BelAir Bob nails it for now.

[sixd8rs]

You could also ghost the stripes.