![]() |
|
Camaro Parts at SS396.com GROUND UP & SS396.com Official Sponsor of Team Camaro |
|
|
||
| Team Camaro Tech Current Topic: 68 valance & fender extension color | ||
| Register | FAQ | Calendar | Chat | Search | Today's Posts | Mark Forums Read | Sponsors | Auto Escrow | Auto Loans | Insurance |
Registered users (free) do not see these large ads 
| Body Shop Paint & Body Forum |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
I have done a search and reviewed several posts but saw differing opinions. I am trying to be correct as possible. All front end sheet metal is at body shop for paint (like GM did it). As I understand 1-the inside front valance panel is body color but light 2-lower inside fender extensions are black 3- What about the underside of the cowl panel, body color or black.
Thanks for your help Mike |
| Sponsored Links | ||
Advertisement | ||
|
#2
|
|||
|
|||
|
This is what I have on my survivor:
- Valence - inner concealed edges are body color, rear is black with lots of body color overspray - Extensions - inner edges are body color, rear is black - Header - inner edges are body color (actually have the black SS stripe extending down from the top of the header), rear is black My car was only painted once after the factory job and it was a quicky cheapo one so I'm confident this is the way it came from the factory. Hope this helps!
__________________
Survivor '68 SS, #s matching, Ash Gold/Ivy Gold, black vinyl top, 396/325hp, TH400, factory A/C, PS, power disc/drum brakes Pro Touring '70 Corvette, #s matching, Daytona Yellow/Black, convertible, 350/350hp with lots of goodies, Muncie 4-spd |
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|