[CNC BLOCKS N/E]

At the end of last year I ordered 20 of the Corteco 16635 one piece oil pan gaskets as I have used this style gasket for years as well as Tom @ 3-V Performance and shops I deal with when Degtroit Gasket was selling this gasket, Any how got down to the last 3 gaskets in the box to descover the gaskets were identicle to the one piece Felpro gasket but a cream color.

I made a few calls first to find out that Corteco sold that line to Rol gaskets and after talking to the teck there I told him this gasket is identicle to the Felpro one piece seal gasket and I have had a lot of calls about those gasket not sealing very good because of cracking. He said they had complaints about what I was talking about and said if they were over torqued they would split, I said there are steel ring around the bolt holes so how could they be over torqued, I really never got an answer.

After a little research I called Mr. Gasket and talked to Don in teck to find out they are selling the soft rubber gasket identicle to the oil Corteco gaskets and after spending some time on the phone they are going to continue this line of gaskets.

The P/N of the Mr. Gasket is 6560