[wspenc43]

Could anybody tell me if all 69 Z/28's came with positive traction rearends. Mine has a 12 bolt, but it is not positration. Would appreciate any information and sources concerning this matter. Thanks a bunch guys! Spencer

[figmandz302]

<BLOCKQUOTE>quote:</font><HR>Originally posted by wspenc43:
Could anybody tell me if all 69 Z/28's came with positive traction rearends. Mine has a 12 bolt, but it is not positration. Would appreciate any information and sources concerning this matter. Thanks a bunch guys! Spencer<HR></BLOCKQUOTE> optional, unless ordering 4.10,4.56,4.88 per the great camaro by michael lamm

[MrGrumpy]

wspenc43,
I have an original 69 Z with build sheet, 4.10 positraction. Most Z's I've seen have positraction, however I have a friend with an original Z with 3.73s 12 bolt rear(original to the car) that is not a posi. Hope this helps.




------------------
Jess - Camaros Limited Nor-Cal
69 Z/28 Lemans Blue

[JohnZ]

Positraction was "recommended", but was neither included nor required on 1969 Z/28's. 4.10 was the lowest (highest numerical) optional ratio available factory-installed; 4.56 and 4.88 axles were dealer-installed only, unless the car was built under an approved COPO.

------------------
JohnZ
'69 Z28 Fathom Green