[nowlin9]

hi guys ,need your help again. been threw all the past posts and got really good info on truble-shooting this gague problem. but what i am looking for is a good picture of the back of the temp gague wired up in the gague pod, i just can't seem to get it right. thanks

[nowlin9]

sorry forgot to mention this is a 68 camaro with factory console gagues. thanks again

[Mark C]

second link in the 4th post on this thread:

http://www.camaros.net/cgi-bin/forum.../10/1631.html?

[ 11-11-2004, 07:43 PM: Message edited by: Mark C ]

[nowlin9]

thanks for replying markC but i did not find that post, my gauge reads all the way to the left when sender wire is diconnected and switch is on, when you ground the wire it goes all the to the right. so can assume the wiring is right,or can i? i would still like to see some pics on hoe the shunt wires behind gauge pod, thanks again

[Mark C]

The pictures of the rear side of the gauge housings are in one of the links referenced in that post:

http://www.camaros.net/cgi-bin/forum.../10/00647.html

Yes, it sounds like your wiring is correct, because thats what the gauge is supposed to do.

[nowlin9]

got to say it again, YOU GUYS ARE THE GREATEST, i know have a working temp gauge, thanks everyone

[Mark C]

What was wrong with it?

[nowlin9]

i had the gauge connectors in the wrong place. thanks again