[69CamaroRacer]

http://cgi.ebay.com/ebaymotors/aw-cg...item=601278207

the car is supposed to only have 3,900 miles and be all origional. Could a copo be an x44???

------------------
69 Camaro RS, 355ci, 71 gm heads 74cc 1.72in 1.50ex,mild cam, Preformer rpm intake, edelbrock 600 carb, 350 turbo w/ shift kit 2500 stall, 12 bolt 4.56 posi..

[Jeff H]

Yes, a lot of COPO cars are X44, it just means no style trim(wheel opening moldings, taillight moldings, drip rail moldings, etc.) I think it's interesting that he never mentions that it's the #'s matching engine which would clinch it being a COPO. We'll see.

------------------
Jeff H - 93 Indy 500 Pace Car(supercharged) & driven daily, Hugger Orange 69 Z28 with JL8 brakes, cross-ram & GM fiberglass hood, TI setup, heater and radio delete, being restored

[camcojb]

No rust?!!!!!!!!! That's gotta be the WORST looking 3900 mile car I've ever seen.

Jody

[CamaroNOTcamero]

i wouldnt believe a word that guy has written. he says no rust or body rot, but its staring you right in the face! it's like the last of those 3900 "original miles" is when it was driven into a lake!

I thoguht COPO's did'nt come with consoles and or gauges? Maybee I'm wrong? I'am I?
Mike

[Unreal]

Most COPO's were plain Janes, but they could be optioned out as almost any Camaro.

The Yenkos were COPOs, but they were ordered by the dealership, and not by the customer. I think the only option that appeared on a Yenko, was vinyl top.

[Unreal]

Buyer beware!!!!!!
1. 711 Black standard interior listed on cowl tag, but photo shows comfortweave.
2. No photos of engine compartment...even if the motor is long gone.
3. May be 3900 on odometer, but must've gone around.
4. No mention of any hi po components. I'll bet photos of underside would show monoleaf, 10 bolt, and single exhaust.

This car has been on E-bay before

------------------
Tony
<UL TYPE=SQUARE>
<LI>1979 Z-28, 350- Edelbrock Performer RPM Package- TH350
<LI>2000 Gmc Sonoma - 5-speed 4.10 rear[/list]

[Spames]

And what about those wheels?

[HOTROD69CAMARO]

Why is the rivet missing from the trim tag in that photo?

------------------
Black 69 camaro

[William]

I talked to the owner. Of course, non-OE motor and they are "looking" for the paperwork. Inner wheel wells cut for slicks,
has welded-on towing brackets. Has BE, M21.

Whaddya want for $20k+?

[FrankP]

Funny.....i figured whoever bid it up to $21,000 would have zero ebay feedback.

I would be willing to give the owner two hundred and fifty bucks, but only if he delivered it.

[Peter Constantine]

The VIN number doesn't turn up on the COPO website anywhere.There is one ZL-1 listed as being sold at Scunzio Chevy(still in business in Johnston,RI)but the numbers don't match.

------------------
HDZ/28

[Jeff H]

Apparently the car has the BE rear which appears to be original to the car so it most likely is a legit COPO. There's a thread going on over at Yenko.net about it http://www.yenko.net/ubb/Forum1/HTML/000827.html let's see if my link works.

------------------
Jeff H - 93 Indy 500 Pace Car(supercharged) & driven daily, Hugger Orange 69 Z28 with JL8 brakes, cross-ram & GM fiberglass hood, TI setup, heater and radio delete, being restored

[FrankP]

From the pictures, and posts by those who went to see it, the car sounds completly trashed.

Apparently the rear end code is correct, therefore this is a ligitimate car? Ever heard of restamps? Sure they do it on Corvette motors all the time.

Perhaps I will get the most beat POS '69 I can find, and a restamp kit, and then you all can bid like crazy for my car.

I'm not saying this guy did that, but I would not bet $30K to find out.

Maybe we can ask the second(or was it third?)owner after he gets done serving his strech on the murder rap.