[69DZ]

Hi, my 69Z is heading to the body shop to "bring back" the fire wall to original. Car was a show car and someone had smoothed over the seams on the engine side of the firewall. So out comes the grinder next week to remove the body filler they used to smooth. What I'm looking for are some more pictures I could provide my body guy to show what is correct from the blower motor cover to the wiring harness connector. Thankx, John

[HwyStarJoe]

John, it's not the best picture in the world but maybe it'll help. It's the last picture on the bottom of the page here:
http://www.geocities.com/hwystarjoe/index5.html


------------------
Joe
1969 Camaro - The Hole-y Grail Project
HwyStar@Rochester.rr.com
HwyStar's Garage!
1970 Malibu

[Jonesy]

Here's a pic of mine after sandblasting. Notice someone took a BFH to the middle of the firewall to provide room for a HEI distributor. I tried to pull it out but the metal here is real thick so I pulled as good as I could and then filled it back to original.
http://hobbystage.net/camaro/media.c...4177588-000408



------------------
1969 Camaro RS/SS 350/4spd, Azure Turquoise (55-55)
Van Nuys Built 11B
currently on the rotisserie
see pics at http://hobbystage.net/camaro/jonesy/

1984 Z28 w/ZZ4 conversion 25th car to roll of the line at Van Nuys

[Jonesy]

After searching, I found more pics of my fire wall.
http://hobbystage.net/camaro/media.c...3775355-001441
http://hobbystage.net/camaro/media.c...3775334-001440
http://hobbystage.net/camaro/media.c...3774871-001430
http://hobbystage.net/camaro/media.c...3774887-001431
http://hobbystage.net/camaro/media.c...3775255-001438
http://hobbystage.net/camaro/media.c...3775294-001439

[69DZ]

Good pic's. These should help. Thank you, John

[JPCamaro]

I have some from when mine was done. I could scan them and E-Mail them if you need them. E-Mail me if interested.

------------------
1969 Camaro RS/SS 350

[JPCamaro]

Hey John,

Check out this guy's restorationhttp://www.camaros.net/forum/Forum2/HTML/005019.html . There is one picture there that shows the F/W seam really well.

J.P.

[69DZ]

Ya I saw those pics. Great shots. Thankx for passing that along. Thankx too for yours. They were just what I wanted. John