[silver_streak67]

does anyone know the proper set up for the internal bearing cap braces on the aluminum heavy duty type rear end covers? thanks in advance- derek

[Rons68]

Torque the preload bolts to 5 ft/lbs; the cover bolts to 25 ft/lbs. Be sure and put some sealer on the preload bolts, or they will leak.

http://www.lpwracing.com/home.htm

[Everett#2390]

From Ron's post, torque the cover bolts first, then, the preload bolts. [img]graemlins/thumbsup.gif[/img]