[pwoolford]

Can anyone post pics of 2.5 or 3 inch dual exhaust on a 69 convertible? I have read previous posts and it looks like shimming the x-brace is the answer but it still looks like a tight fit. The local muffler shop said I can probably forget the x-brace since I tied the frame, replaced all bushings with poly and installed a 6 point cage. I would still like to keep the brace if possible. Thanks in advance.

------------------
69 convertible, 500hp 350, TKO 5-speed, Moser 12 bolt - 3.73, many parts still in boxes...

[BBCamaro]

hey pwoolford, i have a 68 rag-top, bb 454, 550hp, i channeled in sub frame connectors (like detroit speeds) and will also add roll bar, i was thinking 4 point, do you have pics of your six??? is this a strip only car, mine will be both, but it will see alot of street use, and don't want to cliimb over anything, let me know
jake http://hobbystage.net/camaro/bbcamro

[bspears]

pwoolford,

Here are some pics of my 69 vert with a good detail of the xbrace. The exhaust system is the Flowmaster American Thunder system and it fit with very minor tweaking.
http://homepage.mac.com/bspears/PhotoAlbum14.html

good luck with your project

cheers
bob spears

------------------
69mscle

[RickD]

Nice pics, Bob. What type of hangers are bolted to the rear floor?

------------------
Rick Dorion
69 RS Conv,355,Autogear M22,4.10's and I don't worry about stone chips ( yet ).

[bspears]

<BLOCKQUOTE>quote:</font><HR>Originally posted by RickD:
Nice pics, Bob. What type of hangers are bolted to the rear floor?

<HR></BLOCKQUOTE>

I have no idea but I will find out for u

bob

------------------
69mscle

[bspears]

<BLOCKQUOTE>quote:</font><HR>Originally posted by RickD:
Nice pics, Bob. What type of hangers are bolted to the rear floor?

<HR></BLOCKQUOTE>

Rick,

I think those are the ones that come in the American Thunder kit.

bob


------------------
69mscle

[pwoolford]

bob,

Thanks for the pics! Now I don't know whether to order an American Thunder system or take the car (and picture of yours) to my local exhaust shop.

------------------
69 convertible, 500hp 350, TKO 5-speed, Moser 12 bolt - 3.73, many parts still in boxes...

[pwoolford]

BBCamaro,

This car will be mostly street. I'll probably take it to the track a couple times just for fun but I want to build a tubbed hard top big block next...that should satisfy my need for speed. I should have the 6 point done in about two weeks. I'll post pics then.

------------------
69 convertible, 500hp 350, TKO 5-speed, Moser 12 bolt - 3.73, many parts still in boxes...