![]() |
|
|
||
| Team Camaro Tech Current Topic: 1986 camaro help | ||
Registered users (free) do not see these large ads 
| Third Generation 1982-1992 |
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|||
|
I have a 1986 350'cid' *v-8* camaro and I would like to know some websites where I can find mods and parts. I've been looking for sometime now and can't find anything good. To explain... my car is simply a 1986 camaro sport coupe with a 350 motor droped into it with an edlebrock carberator bolted on top. I want to find headlight and taillight covers, a passenger side door in good condition, and a dash cover or a new dash all together "mine has a crack". I'd also like to know how I would set it up to where the back tires stick out wider then the fronts. "simply get wheel spacers"?
One last question. Will "most" parts for the 86 or most 82-92 camaros fit my 86 sport coupe? I'd also like to find the hatch glass louvel cover. thanks so much and I hope someone can help me with this
__________________
basically, I'm frustrated with women cause I'm aware that for the rest of my life I'm going to try to get in what I came out of in the first place. |
|
#2
|
|||
|
|||
|
First off, welcome to the site. You may be interested in http://www.thirdgen.org as well, since they specialize in 3rd gens. This site is mostely 1st gen, but there are few guys around which are 3rd gen gurus. If you're interested I can email you my bookmarks file. It's somewhat organized, though some of the links may be dead by now. I have links for most of the major aftermarket suppliers in there. If you're interested click my userID to send me an email.
__________________
Dave ======================== 68 Coupe, 350 w/ Edelbrock Performer RPM heads, cam, intake, 700R4, Dave's small body HEI |
|
#3
|
|||
|
|||
|
thirdgen is a good site for info and they do have a classified section.there have been several complaints about parts not being delivered however,myself i stick with ebay and a paypal account so i at least have some recourse in case of a problem.
Eric B
__________________
86 camaro,383,topline vortecs,scat crank,wiseco forged 9.5:1,6"scat rods,comp xs282s,performer rpm,750 proform vac sec,msd in cap, hooker coated 1 5/8"headers,3"flowmaster,700r4,2800 stall,3.42 10 bolt posi,hotchkiss lca's,aje tube k member & a-arms |
|
#4
|
|||
|
|||
|
really cant beat classic industries for parts best prices and they have just about everything
|
|
#5
|
|||
|
|||
|
Fbody motorsports (fbodymotorsports.com) can get new parts from GM as well as aftermarket parts. They have a junkyard with a lot of F bodies. I not long ago got a 3.23 posi rear assembly from them. Only problem is they don't have an 800 number.
|
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|