Engine Mounts - Team Camaro Tech
Tech 2000 Our previous General Forum
Replies ONLY - no new topics.

 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old Mar 14th, 00, 04:34 PM Thread Starter
 
Join Date: Jan 2000
Location: Indianapolis
Posts: 17
Post

My 67 Camaro has engine mount towers that are approx 1.75in from the x-member to the mount bolt center. Are these the correct towers for a B.B.C ??. If my B.B.C balancer is 1.75in wide & 8in dia, is this enough info to detertmine if its a 454 or a 427. THANKS,Mike.
Mike Anderson is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old Mar 14th, 00, 07:01 PM
Senior Tech
 
Join Date: Dec 1999
Location: Ga. USA
Posts: 236
Post

Mike- B.B.C balancer for a 454 should have
some type of counter weights attached on the inside and a 427 balancer should be uniform
on the inside. The 454 is externally balanced
and will have counter weights on both the flywheel and harmonic balancer. The 427 is
internally balanced which will had either
metal added or removed from the crank to acheive balance of the rotating assembly.
Bob Jenkins is offline  
post #3 of 4 (permalink) Old Mar 15th, 00, 12:27 AM
Senior Tech
Bruce
 
Join Date: Jan 2000
Location: PA
Posts: 921
Post

on the frame mounts, on big blocks, the one side is higher then the other. i'm thinking it's the passenger side, so don't quote me on that. look to see if you can find any part numbers. but now that i think about it, i know the one is higher on 69 camaro's, but for a 67, that i'm not sure of.
good luck,
bruce
bruce69camaro is offline  
 
post #4 of 4 (permalink) Old Mar 15th, 00, 07:08 PM
Senior Tech
 
Join Date: Sep 1999
Location: Idaho
Posts: 219
Post

The drivers side frame mount is higher to accomodate the steering gear. Bob is correct on the balancer difference. Unfortunately you'll probably have to remove the balancer to check this.

------------------
67 Camaro LS6 454/TH400/12bolt 3.73
cardude is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Team Camaro Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address.
NOTE we receive a lot of registrations with bad email addresses. IF you do not receive your confirmation email you will not be able to post. contact support and we will try and help.
Be sure you enter a valid email address and check your spam folder as well.



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome