I got a disc brake conversion kit from CPP for the front, on my 69 Camaro.
Instead of using the factory brake hoses, I got Russell braided lines.
To join the lines to the calipers, I'm using a #3 x 10mm-1.50 male brake adapter.
My problem is, I can't get it to seal and I get a small drop of brake fluid leaking from the fitting.
Is it possible to "over" tighten the crush washer?
Also, I was advised to use a teflon sealer/paste on the brake adapter to help get it to seal.
69 Camaro, 496, 10.34 @ 134.77 mph.