Gold Lifetime Member
Join Date: Oct 2018
Location: Thousand Oaks, CA
OEM Rear Floating Caliper for 11 inch rotor w/4.75
OK... I know I might be violating the code of the Fellowship of the Stickies but I have been unable to find answers to these questions -
I have an 8.2 ten bolt that I've decided to rebuild with a disk brake conversion being at the top of the punch list. I like the idea of using parts that are readily available, not proprietary and have a floating caliper.
I have 15 inch rallys so the LS1 conversion is not a good choice, is the LT1 system a floating caliper too? If so, which over the counter rotor can I source with the 4.75 pattern? Thanks very much -
Edit - question answered, the website I was using for rotor dimensions incorrectly listed the LT1/LS1 bolt pattern as 5x4.65
1968 Standard Coupe, LS1, T56
2007 Tahoe, Z71, Cold Air & Tune
2001 Silverado, Z71, TSP Cam, Cold Air & Tune
Last edited by really_n0b0dy; Dec 30th, 18 at 12:21 PM.