Team Camaro Tech - View Single Post - 70 Restomod Coil Over Question
View Single Post
post #7 of (permalink) Old Feb 4th, 19, 08:14 AM
Vega$69
Moderator
John
 
Vega$69's Avatar
 
Join Date: Sep 2010
Location: Vegas NV/Wesley Chapel FL
Posts: 12,061
Garage
Re: 70 Restomod Coil Over Question

Quote:
Originally Posted by Craig1969 View Post
I'm going to try cutting the springs this week and see what happens. I tried this a couple years ago on a 68 and while they were cut the same, one side ended up 3/4 lower and I made certain they were in the pockets correctly. Ended up cutting two more sections, 1/2" at a time to get it right. Major PITA but it worked.

This is an article I found while searching for coil overs.

1973 Chevrolet Camaro: Better looks and handling with a bolt-in coilover kit
Look nice and cost about $500 a pair.

Take a close look at the installed coil over and imagine how hard it is to get the adjustment wrench in position to move the lock nuts.

Can be done but not as easy as it's made out to be.
Vega$69 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome