Re: 327 oil pan
If you raise the engine and put a short piece of 2X4 with the 4" part (I think - it was quite a while ago) up between the motor mount and the frame stand you will have enough clearance to remove the pan. You'll have to have the crank indexed to a certain position though so the pan will clear the rods. I know this will work as I've done it before but I don't remember what position the crank has to be in.
67 Camaro: 454/TH400/4.10 12 bolt. Lots of options: PS/PDB/PW, tilt, tach, gauges and more. K-K + 797-Z...
"Politics is the art of looking for trouble, finding it whether it exists or not, diagnosing it incorrectly and applying the wrong remedy" - Sir Ernest Benn