Team Camaro Tech banner

carb question

662 views 2 replies 2 participants last post by  mhaseleu03 
#1 ·
I am building a 468 with 9.5-1 comp aluminum heads with 320 cc runner and 119cc chamber and a 236/242 294/302 .620/.635 112 cam. I am looking for suggestions on the size of carb that should be used for this motor. I would like one with a choke, should it have machanical or vaccum secondaries. Holly tech support says an 850 would work but that seams to big. Any suggestions would be great.

Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top