What is a good after market Oil pan for a 67? - Team Camaro Tech
Engine General Engine Discussion.

 
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old Sep 4th, 14, 12:47 AM Thread Starter
Senior Tech
Larry
 
Join Date: Oct 2009
Location: virginia
Posts: 338
What is a good after market Oil pan for a 67?

Looking for a good aftermarket oil pan for a SBC going in a 67 Camaro that will fit without issues. High capacity / windage equipped is my preference. Want to hear from guys who have them in their 67's. Thanks
L Holmes is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old Sep 4th, 14, 04:39 AM
Senior Tech
Steiner
 
Join Date: Mar 2009
Location: Lyman, SC
Posts: 8,348
Re: What is a good after market Oil pan for a 67?

Milodon makes good stuff. I run the first one on this page, "Low Profile Design" and their windage tray. Scroll down and take a look at the "Street Performance" one...has built in windage tray. Holds five quarts which might be below what you're looking for though.
http://www.milodon.com/oil-pans/stre...ns-sbchevy.asp

'69 Camaro
Dart 400-AFR 195-224/224 HR-Powerjection III TB with F.A.S.T. Sportsman XFI
TKO 600-Moser 3.42-Detroit Truetrac
500hp/538lbft

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

'69 Camaro Beater-SFT 327-M20-Moser 4.10-sold
'02 Z/28 vert-stock-sold and totaled
Steiner is offline  
post #3 of 9 (permalink) Old Sep 4th, 14, 05:42 AM
Gold Lifetime Member
Den
 
DenRS's Avatar
 
Join Date: Jul 2000
Location: Sturbridge, MA
Posts: 1,417
Garage
Re: What is a good after market Oil pan for a 67?

I have a red Moroso 7 qt low profile pan in my 69. I bought my pan because Moroso also made a oil pump with a pickup welded to it that fits this pan. I think Jegs sold it as a kit. I don't have the windage tray. My friend has the same style Moroso pan with a windage tray in his 67. Neither of us have any fitment issues. Only thing I would say is to strip the paint they put on it and redo it with a better quality paint. Not sure how Moroso prepped the pan for paint, but I could sneeze on it and paint would fall off.

1969 Camaro 350, Trickflow heads, ST-10 4spd, Hotchkis suspension, Baer SS brake kit, moser 12bolt
DenRS is offline  
 
post #4 of 9 (permalink) Old Sep 4th, 14, 06:25 AM
Senior Tech
Chris
 
Join Date: Feb 2006
Location: Tri-Cities, TN
Posts: 539
Re: What is a good after market Oil pan for a 67?

B&B 91087 for SB
B&B 91487 for BB

Chris

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
cstraub is offline  
post #5 of 9 (permalink) Old Sep 4th, 14, 07:30 AM
Senior Tech
Sean
 
Join Date: Feb 2002
Location: N.W. Washington
Posts: 7,964
Re: What is a good after market Oil pan for a 67?

Milodon 31167. I have that pan in my 68 and it fits great and is a really good pan. Kind of expensive but a very good pan.

Sean

1968 rs with an old school 354" SB2.2 pump gas motor.

Repetition does not transform a lie into a truth.

Franklin D. Roosevelt
68rs406 is offline  
post #6 of 9 (permalink) Old Sep 4th, 14, 04:47 PM Thread Starter
Senior Tech
Larry
 
Join Date: Oct 2009
Location: virginia
Posts: 338
Re: What is a good after market Oil pan for a 67?

Thanks guys. Exactly what I needed.
L Holmes is offline  
post #7 of 9 (permalink) Old Sep 4th, 14, 05:46 PM
Senior Tech
Randy
 
Join Date: Aug 2006
Location: illinois
Posts: 571
Re: What is a good after market Oil pan for a 67?

Check out Champ oil pans, excellent fit and finish, used one on my 327. Part#CP60LT. It has a 6" trap door, crank scraper, removable windage tray. 8" deep and holds 8 quarts with filter.

1967 camaro, 327, 9.7 CR, comp cam xs274solid, vortec cylinder heads, edelbrock vortec performer rpm, 750 annular carb, HVH 2" spacer, msd pro billet w/6A box, turbo 350 trans, 3500 stall, 4:10 gears, caltracs suspension, m/t drag radials.
rkmjbad67 is offline  
post #8 of 9 (permalink) Old Sep 5th, 14, 04:57 AM
Senior Tech
Mike
 
Join Date: Oct 2008
Location: Northern IL.
Posts: 472
Re: What is a good after market Oil pan for a 67?

Canton makes a nice pan, i have one and it fits good and looks good.

67 R/S Blue 406 518HP and 504TQ Dart block,Callies crank,Mahle pistons,Ultradyne cam 230/238 duration @.050 530 lift at 113 lsa, Afr 195 heads,Holley 4150HP carb and RPM Air gap. TKO600 with 373 gears
mike's blue67 is offline  
post #9 of 9 (permalink) Old Sep 5th, 14, 09:11 AM
Senior Tech
Dave
 
Join Date: Dec 2005
Location: Tampa, Florida
Posts: 4,681
Re: What is a good after market Oil pan for a 67?

Canton, Milodon, Moroso, Steff's all make great oil pans. The thing to be sure of is that you get a matching oil pump pick up, or an aftermarket oil pump with the pick-up in the base of the pump (competition styled billet oil pumps that are really pricey) to match the pan. Oil control is only an issue at higher RPM's; but it is an issue above 5,200 RPM that will cost you horsepower.

Every aftermarket pan I have seen from the above was internally baffled to keep oil in the sump and covering the pick-up. With kick-outs they will work well on the street or in road racing without additional oil control scrapers. With a roller cam you actually need oil being thrown around as the roller bearings in the tappets and the piston pins are splash lubricated so a really tight oil control system can cause issues with reliability.

Larger Dave
Larger Dave is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Team Camaro Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address.
NOTE we receive a lot of registrations with bad email addresses. IF you do not receive your confirmation email you will not be able to post. contact support and we will try and help.
Be sure you enter a valid email address and check your spam folder as well.



Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome