Join Date: Dec 2001
Location: Latonia Kentucky
I don't have a pic., but I'll give a shot at a description.
It's a 1/4" diameter rod with a 90 degree bend on one end. The other end is threaded (fine thread) with a swivel nut which is adjustable to get the right length. It will be bent at various angles depending on application. The swivel nut attaches to the carb, and the 90* end goes to the throttle lever.
If you have an Assembly Manual, it should be depicted there.
It can probably be used for your Holley. Some re-bending may be needed to align it properly to the carb. Another option would be to get one for a car that originally came with a Holley. The resto. houses sell them.