Join Date: May 2001
Location: Antigua & Barbuda
Just as subject says - I have heads with what are much taller springs compared to the swap out springs I picked up with a not so used roller cam deal
The deal came off a 400ci - do 400 ci heads usually have longer valves than 350 ci use heads??
The swap springs fit my WP II heads 1.437" (approx. dia), but they come up short of install height
someone suggested I may have to consider +.100" valves if I can't get my heads machined to accomodate larger diameter springs that have the capacity to meet the recommended spring pressures for the cam
anywhere I can get this info. to help me know what my heads have now stock length or otherwise?
T.K.-85 Camaro-383ci/AFR 210 CNCport-65cc/ProSystem750DP/SRP 7cc dome/Motown int./Comp.S roller 268/275-108*-.720"/.700"@1.6/Big Shot plate/TH-350/8in. conv./4.71 Ford 9in/1.75 super comp/10pt. cage/29.5x10.5x15