Got a strange question. Putting a wiring harness in a 69 Z. Completely stock. My Z has an HEI conversion and harness has been modified, so I haven't a clue as to what goes where.
There are two wires that are in the coil area, one Brown and a white wire with red stripes along with a yellow wire attached? I think the brown is the negative side of the coil and the white/red and yellow the positive side of the coil. At the end of the harness there's a purple and a yellow wire that go to the starter, but where? It's a stock harness from Classic Industries. Also the distributor has a single black wire coming from it? Is this negative for the coil??? Any help would be great. I tried using my Z as a reference but it's way different than this.