Building a 383 Stroker Motor - Team Camaro Tech
Tech 2001 General Tech questions from 2001
Replies ONLY, no new topics.

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old Aug 30th, 01, 03:08 PM Thread Starter
Join Date: Aug 2001
Location: Milbridge,Me,USA
Posts: 3

I want to build a 383 for my 89 Iroc Camaro. I don't want to spend to much but than again I don't want to cut corners. I want to get the most performance and try not to have to much of a gas gussler as it will be my daily driver during the summer. So if you can help me with products like heads,intake,pistons,cams etc. It would be great.
Camaroguy89 is offline  
Sponsored Links
post #2 of 3 (permalink) Old Aug 30th, 01, 03:20 PM
Senior Tech
Join Date: Jun 2001
Location: Birmingham Mi,
Posts: 142
Post go with vortec heads, comp cams xe268, perf. rpm. vortec manifold, and some slightly dished pistons...should be good for 430 hp.
Joshua Leslie is offline  
post #3 of 3 (permalink) Old Aug 30th, 01, 03:34 PM
Tech Team
Join Date: Jul 2001
Location: caldwell,id,usa
Posts: 73

vortech heads are good cheap heads, but that will need new springs if you get too wild with a cam. since you have an 89 i will assume you have roller lifters? that too will gain you some ponies. if you want mileage a 383 might not be the best idea. also if you want to make mondo juice you will need some searious work done on the rear axle, and probably a pro built tranny(unless you already have a 12 bolt and a tough tranny) i hope this helps
badcam is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Team Camaro Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address.
NOTE we receive a lot of registrations with bad email addresses. IF you do not receive your confirmation email you will not be able to post. contact support and we will try and help.
Be sure you enter a valid email address and check your spam folder as well.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome