MUNCIE HELP - Team Camaro Tech
Tech 2001 General Tech questions from 2001
Replies ONLY, no new topics.

LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old Nov 28th, 01, 05:15 PM Thread Starter
Tech Team
Join Date: Nov 2001
Location: Marshfield, WI,usa
Posts: 92

I could use some help figuring out which muncie I have. On the passenger side of the case running palleral with the tranny is 3925660 then below that is U.S. patent # 3088336 running vertical with the case there are two numbers the top one looks like P0Mo7A and below tha is (looks like) 1oK107366. On the side cover is the # 3884685. I can tell you that the imput shaft has ten splines and the output shaft has 27. I would like to know what year it is and is it a 20,21,22 thanks for any input.
blown67ss is offline  
Sponsored Links
post #2 of 7 (permalink) Old Nov 28th, 01, 05:20 PM
Gold Lifetime Member
Join Date: Nov 1999
Location: Woodland, Ca.
Posts: 3,550

It is a M20 The A in POMO7A means M20, B would be M21 and C would be M22.
clill is offline  
post #3 of 7 (permalink) Old Nov 28th, 01, 07:07 PM
Senior Tech
Join Date: Sep 2001
Location: Yorkville In
Posts: 1,420

Casting #s are 68 and 69 passenger car corvette, nova, chevelle, and camaro.
Branded is offline  
post #4 of 7 (permalink) Old Nov 29th, 01, 06:51 AM
Senior Tech
Join Date: May 2001
Location: Chattanooga, TN, USA
Posts: 7,609

The "A, B, C" suffix only started in 69, and if memory serves me, starting in mid year (maybe Dec, 68)
Unreal is offline  
post #5 of 7 (permalink) Old Nov 29th, 01, 07:38 AM
Senior Tech
Join Date: Feb 2001
Location: Concord Cal. USA
Posts: 2,664

The only way you can really tell what you have is to count teeth on the gears. Alot have had gear changes and such. I just got a Saginaw that had an input with no groves. It should have been a 2.85 low. Wrong it was a 3.11. I know that service Muncies were mismarked but this is the first Saginaw I have found that was.

oger is offline  
post #6 of 7 (permalink) Old Nov 29th, 01, 07:54 AM
Senior Tech
Join Date: Sep 2001
Location: Yorkville In
Posts: 1,420

oger is right the 660 case was also used with M22
Branded is offline  
post #7 of 7 (permalink) Old Nov 29th, 01, 09:05 AM
Gold Lifetime Member
Join Date: Jan 2000
Location: N. California
Posts: 770

I'm certainly no expert but here's how I read the numbers:

1. P0M07A is the transmission's assembly date code and original gear ratio(P=Muncie, 0=1970, M07=August 7, A=M20 2.52:1 wide ratio).

2. The 1oK107366 is a copy of the engine block stamping (1=Chevrolet, 0=1970, K=Kansas City?, 107366=Last 6 digits of VIN).

Looks to me like an M20 from an early production 1971 model year (non-Camaro) car.
deejaygee is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Team Camaro Tech forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address.
NOTE we receive a lot of registrations with bad email addresses. IF you do not receive your confirmation email you will not be able to post. contact support and we will try and help.
Be sure you enter a valid email address and check your spam folder as well.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome