Re: shroud ?
FWIW, I have a long water pump with a '69 shroud, Flex-o-Lite clutch fan, and Hayden clutch. The fan barely does go into the shroud. The difference in height between a long and short pump is a little over an inch so in my case a '67 shroud would probably not cause a problem. I'd mock it up before I bought anything if I were you. Easy enough to do.
If you're going to run a straight mechanical fan with no clutch, there are all different sizes of spacers so you can position it correctly. I think my old mechanical fan used about a 2" spacer so a 1" spacer would probably set it up right in an early shroud.
Dart 400-AFR 195-224/224 HR-Powerjection III TB with F.A.S.T. Sportsman XFI
TKO 600-Moser 3.42-Detroit Truetrac
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
'69 Camaro Beater-SFT 327-M20-Moser 4.10-sold
'02 Z/28 vert-stock-sold and totaled