Team Camaro Tech banner

Lower control arm bushing tool help needed

940 views 2 replies 2 participants last post by  almano 
#1 ·
Hi,

I need some help with the removal/installation of the lower control arm bushings.
I see the Ridetech 85000009 tool, what basically washers and some sleeve and a threaded rod.
The only thing i need is the size of the spacer what prevents the control arm legs collapsing when You press the bushing out. I did push the bushings out without a spacer and now all f.cked. I need to know what was the original spacing between, so I can fabricate the right spacer.
Thanks for the help.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top