Team Camaro Tech banner

Found these For Sale Will they fit my 67?

2K views 9 replies 5 participants last post by  6D9 
#1 ·
My 67 stock sub frame no minitubs may go with G bar and aftermarket front CTL Arms.

The r/t for sale below Will they fit my car?


I have a set of American Racing Torque Thrust II polished with Nitto 555 tires ONLY 250 MILES on them.

Details: $1400.00

Rears: 18" x 10" 5.75" B.S. with Nitto 275/40/18 tires
Fronts: 17" x 8" 4.5" B.S. with Nitto 245/45/17 tires
all 5 on 4.75" bolt pattern
 
#5 ·
Im running some 18x10's with 5.75bs on my 69.Tires are also 275/40/18's. I needed to trim the fender lips but other than that fit is perfect! My car has a 2" front/3" rear drop. Biggest problem I see is the fronts. If your car is low the 4.5" bs and 245's will most likely rub. My first set of front wheels were 4.75bs and it rubbed bad. I ended up with 5" bs fronts and it still rubs some with a passenger in the car.
 
#7 ·
The 69's seem to have a bit more room but check out "streetfighter68's" car on Pro-touring.com. He has a 68 and is running 18x10's with 5.5" bs. Tires are even wider at 285/35/18.
 
#9 ·
That cars tubbed from the looks of it shocks are inboard a bit and it says it has DSE leaf springs, so prolly minitub kit as well

EDIT: maybe hes got the DSE springs and the shock mounts from them and springs inboard to be able to scoot the tire in more..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top