Team Camaro Tech banner

350

  1. Rebuild or Buy a Crate

    Engine
    Good Evening Everyone, I have recently purchased a 68 Camaro, my first hot rod/ project car. We have finished the front and rear suspension and now I am about to dive into the motor. Here is what is going on. In the car right now is a Vortec 350 Crate from the mid 1990s per the #880 stamp on...
  2. 67 350 SBC Vacuum / Brake Problems

    Engine
    Afternoon Guys 'n Gals - So I've put this in the engine section because I'm not convinced this is related to my brakes. I'll explain why: Brakes have previously performed OK, not perfect but OK, I could lock the wheels up with a good stomp or a bit of a pump pump stomp. I had issues with the...
  3. I bought a camaro today!!

    New Member Introductions
    Hey Everyone, Well I have a pretty cool story and I'm excited to share it with all of you or at least anyone who will read it... A long time ago when I was 6 years old we had a neighbor on our street who was & still is a TOTAL Camaro Nut!! His name is Steve, and at 6 years old he helped me and...
  4. 350 rebuilt help.

    Restoration Corner
    Hello guys , This is my first time posting on this site. I have a couple questions maybe you guys can help me on this topic. I have a 1968 RS/SS Camaro with matching numbers. Im finally going to rebuilt the engine and Im not sure the do's and donts to not affect the whole matching numbers...
  5. 67 RS/SS 350 AC - correct fan, clutch, spacer

    Tag Team
    Restoring a 1967 RS/SS 350 powerglide with AC. Wanted to confirm if these are the correct part numbers for the fan (3789562), clutch (3916139), and spacer (3814241). Does the fan blade have 4 or 5 rivets on each blade? Also, wanted to confirm these part numbers should appear on those parts and...
  6. Engine Nearly Stalling Under Load

    Engine
    Greetings everyone! First time user here (just picked up my first Camaro a few weeks ago, after waiting a lifetime). It's a '69 Camaro, with the original 350 engine, and what looks like a fresh Edlelbrock 4-barrel carb. The car fires right up. Parked in the drive way, the car responds well...
  7. Finally got my Camaro Project Home

    New Member Introductions
    I finally got my Camaro project home. I purchased it from a guy in Chicago and had to have it shipped to Kansas. It is a 1967 RS SS 350 Convertible. It was in better shape than I expected. Most of the metal has been replaced with AMD panels. It does need work on the floor pan and and a few other...
  8. Hawaii Members

    Bench Racing
    Hey TC, I would just like to know if there are any members on this site who are from Hawaii. I'm also part of the 808 Camaros Car Club. Thanks, Brendon
  9. Rally Green 69 Camaros

    Bench Racing
    Hello, I am new to Team Camaro and I currently own a Rally Green 69 RS/SS 350 with White Standard Interior. I plan to eventually to install Ivory Houndstooth Seat Covers. I already have GM Deluxe Door Panels just have to spray it White. I was wondering if anyone on Team Camaro has a Rally Green...
  10. Moisture on the top of intake manifold near carb? What is it?

    Engine
    There is a small amount of liquid that seems to build up on the intake manifold bolt, driver's side of the carb. Doesn't smell like gas, but not positive. Thoughts? It almost looks like it is coming up through the bolt threads of the intake manifold. Thanks for the help!!!!
  11. Can't get over 3100 RPMs on my 69 350ci

    Engine
    Just bought a new 69 Camaro. Engine was running, everything seemed ok. It did not have a tach in it and I was told that it had ben sitting for several years, running little. I didn't want to run it to hard Put aftermarket gauges in it so I could make sure that everything was running correctly...
  12. Greetings from Texas

    New Member Introductions
    Howdy to all. I am your typical middle aged guy who wants to breath life back into a car he has held on to for years. I have a 1989 Iroc Z28 with the 305, 5 speed and T-tops. Of course raising a family and feeding my desire for horsepower ain't always financially possible, the old girl has had...
  13. what emblems should I use?

    Camaro Tech
    I'm restoring my 68 Camaro convertible back to as close as possible to original but somewhere along the line someone replaced the original 327 with a 350. So my question is, what fender emblems should I put on the car? 327 or 350? I'm thinking 350 but really not sure. What do you guys think...
  14. 350 Hard Start When Hot

    Engine
    I know there is a lot of topics already discussing this but cant find my particular situation so here it goes. I have a 67 Camaro with a 350, NEW starter, NEW plugs gaped at .45, and new 4 Barrel Carb. It starts just fine in the morning or when it has had a couple hours to cool off but if am...
  15. Cam and head suggestions for 350

    Engine
    I'm putting a new cam and heads in my 350 with the assistance of one of my mechanic friends. I am a newbie when it comes to engine building and would like to get your input in addition to his on what would be some good options for me to consider for a cam and heads. I had spoke to the person...
  16. Help with Engine - possibly cam

    Engine
    Hello, I have a 69 camaro, 350 engine all stock with headers and a ready-to-run distributor. I was driving on the freeway when a loud pop occurred under the hood, my car turned off and a small cloud of smoke was left behind. Once i was on the shoulder, i tried to start the car again and...
  17. 350 block

    Forum Classifieds
    Have 350 block for sale finish bore of 4.045 Has Forged splayed caps installed. Block has little use since built Decks blue printed 8.995 deck height Mains bores and block decked on Rottler F65 machiene center High quality blueprint machiene work Honed on Sunnen CV 616 with torque plates...
  18. 1969 Camaro Convertible

    What's it worth?
    I was interested in getting some input on what you think the following car is worth. Appreciate your comments. - 1969 Camaro Convertible - LM-1 350, 4spd - original matching drivetrain w/ 12 bolt. No modifications. ok running condition. no apparent issues besides in need of carb rebuild...
  19. Synthetic Oil

    Engine
    Hello everyone, I have a 69' SS/RS convertible 350 and want to assure that I am using the correct oil. I know the zinc content is important for the old engines. I would like to know if any of you have recommendations on what oil to use in my car. Thanks, Chris
  20. Help with intake manifold and cam

    Performance
    I have a 69 camaro and a 350 engine all stock and a 4 barrel quadrajet carb. A friend gave me an Edelbrock torker II intake manifold but I don't know if I should put it on or if I am better off with the original intake manifold. I don't plan to change the carb anytime soon. Also, another...
Top