Team Camaro Tech banner

cam

  1. 327 hop up ! Cam ?

    Engine
    I accidently bought another 67 Camaro, it seems to have a great thirst for engine oil and its got the original 327 motor in it. I have a rather nice 350 crank, rods and pistons that were in a 327 block that was frost damaged. The pistons are +30 so plenty of room to bore away any wear we...
  2. BBC Valve Train (cam,lifters,rockers,all)

    Forum Classifieds
    BBC (big block Chevy) parts. Performance and race parts. 2G Camaro I am redoing a bored and stroked 454 (496) and am making quite a few changes to the engine. This is an engine I picked up a few months ago and hence have parts that I am changing out. The engine STH only about 1 hour on the clock...
  3. Cam and head suggestions for 350

    Engine
    I'm putting a new cam and heads in my 350 with the assistance of one of my mechanic friends. I am a newbie when it comes to engine building and would like to get your input in addition to his on what would be some good options for me to consider for a cam and heads. I had spoke to the person...
  4. What cam for tbi converted to carb?

    Third Generation
    I have a *block, it came out of a 91 suburban. I want to know what block it would be vortec or whatever. But the injectors went bad so instead of replacing them I just junked the whole system and put a performer intake on it and 600 cfm carb, of course I lost power, just want to know what cam...
  5. Cam Bearing Problem

    Fourth Generation
    I recently traded a Mitsubishi Eclipse and therefore am new to the muscle. I have a Cam Bearing going out due to ( I think ) letting the car over heat and warping it. At least that's what I was told. How much is it gonna cost to fix the problem? Am I gonna have to go through the whole rebuild...
  6. 350 - Do I have the right Camshaft?

    Performance
    I just got my rebuilt 350 back from the shop and the kit that was purchased for the rebuild included an EnginePro MC1993 Camshaft. I was researching this and found myself overwhlemed with technical specifications, and I have no clue what they mean. Can someone help me understand if this is a...
  7. Need recommendations on a camshaft

    Performance
    Just picked up a set of Dart Pro 1 230 heads looking to go with a roller camshaft now (springs are good to .650 lift max) Motor will see 150hp - 200hp shot of nitrous also, so a cam that will perform well on motor and maybe a little better on nitrous is what I need. I do drive this car on the...
  8. Rookie question regarding cams

    Engine
    I'm looking into the Thumpr series cams from Comp: http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=1259&sb=0. Reading the specs, it says 'needs 9:1 CR." What does this mean? I tried a few searches (TC and google) but didn't see anything too clear. Incidentally, if there are...
  9. Help with intake manifold and cam

    Performance
    I have a 69 camaro and a 350 engine all stock and a 4 barrel quadrajet carb. A friend gave me an Edelbrock torker II intake manifold but I don't know if I should put it on or if I am better off with the original intake manifold. I don't plan to change the carb anytime soon. Also, another...
  10. Looking for some new heads and cam...Help!

    Camaro Tech
    In the process of buying some a new set of heads and a bigger cam..I have a 1978 350 corvette block bored .60 w/4 relief eagle pistons and eagle 400 crank i have a 273 lifting cam that i bought with a holley street dominator intake manifold...Im looking for some aluminum heads and a bigger cam...
  11. Putting cam in, what other components and upgrades will i need?

    Performance
    I have a 92 rs camaro with the tbi 305, i've found the cam i'd like to get in it which is the comp cam 270 h series, it claims i can use it with the stock torque converter, that true? it has a 470 lift with 270 duratrion. but i also need to know what all other upgrades i will need to make for...
  12. engine cams SBC BBC some others

    Forum Classifieds
    Call it...creative acquistioning.l:)Cleaned out a building for the parts and need to get rid of some cams. ALL new some come with lifters. Flat tappet, Retro-fit SBC, BBC just email me. Some flat tappet kits are $90:yes: and that includes lifters!!:hurray: Some Retro-fit are $239. I think thats...
Top